Siemens RX1500 User Manual page 418

Chapter 5
Setup and Configuration
Figure 421: Host Options Form
1. IPsec Zone Check Box
Figure 422: Main Host Settings Form
1. Zone List 2. Interface List
6. On the Host Options form, configure the following parameter(s) as required:
Parameter
IPSec zone
7. On the Main Host Settings form, configure the following parameter(s) as required:
Parameter
Zone
Interface
IP Address List
description
8. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
9. Click Exit Transaction or continue making changes.
386
3. IP Address Box 4. Description Box
Description
Default: false
Description
A pre-defined zone
A pre-defined interface to which optional IPs and/or networks can be added.
(Optional) Additional IP addresses or networks - comma separated.
(Optional) The description string for this host.
RUGGEDCOM ROX II
User Guide
Adding a Host