Viewing The Status Of The Ldp Discovery Interfaces; Viewing The Status Of The Ldp Neighbor Local Node Information - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.39.7.2

Viewing the Status of the LDP Discovery Interfaces

To view the status of the LDP discovery interfaces on the device, navigate to mpls » ldp » status » discovery »
interfaces. If LDP interfaces have been configured, the LDP Discovery Interfaces Status Information table
appears.
Figure 940: LDP Discovery Interfaces Status Information Table
This table provides the following information:
Parameter
Interface
Src IP Addr
Peer ID
Peer IP
State
For more information about configuring LDP discovery interfaces, refer to
an LDP Interface".
Section 5.39.7.3

Viewing the Status of the LDP Neighbor Local Node Information

To view the status of the local node(s) for the LDP neighbor on the device, navigate to mpls » ldp » status »
neighbor » local-node-information. The LDP Neighbor Local Node Status Information table appears.
Figure 941: LDP Neighbor Local Node Status Information Table
This table provides the following information:
Parameter
LDP ID
Holdtime
814
Description
The LDP discovery interface.
The LDP discovery source IP address.
The LDP discovery peer ID.
LDP discovery peer IP address
The LDP discovery interface state.
Description
The LDP ID of the LDP neighbor local node.
LDP holdtime of the neighbor local node.
Section 5.39.7.9, "Enabling/Disabling
Viewing the Status of the LDP Discovery Interfaces
RUGGEDCOM ROX II
User Guide