Adding A Vrrp Tracker - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.26.4.2

Adding a VRRP Tracker

To add a VRRP tracker, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to services » vrrp » trackers and click <Add tracker>. The Key Settings form appears.
2.
Figure 679: Key Settings Form
1. Tracker Name Box
3. Configure the following parameter(s) as required:
Parameter
Tracker Name
4. Click Add to add the tracker. The Tracker form appears.
Adding a VRRP Tracker
1
2. Add Button
Description
The name of the tracker.
Chapter 5
Setup and Configuration
2
585