Deleting An Option 82 Class From An Ip Pool - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 394: Option 82 Configuration Form
1. Remote ID Box
6. Configure the following parameter(s) as required:
Parameter
remote-id
circuit-id
7. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8. Click Exit Transaction or continue making changes.
Section 5.15.16.3

Deleting an Option 82 Class From an IP Pool

To delete an Option 82 class from an IP Pool, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options » ippool » {description} » option82,
where {name} is the name of the subnet and {description} is the name of the IP pool. The Option 82
Configuration table appears.
360
1
2
2. Circuit ID Box
Description
Specifies the information relating to the remote host end of the circuit.
Specifies the local information to which circuit the request came in on.
Deleting an Option 82 Class From an IP Pool
RUGGEDCOM ROX II
User Guide