Deleting A Custom Client Option - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 354: Key Settings Form
1. Number Box
4. Configure the following parameter(s) as required:
Parameter
number
value
Click Add.
5.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.15.8.3

Deleting a Custom Client Option

To delete a custom client option for a DHCP subnet, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options » client » custom, where {name} is the
name of the subnet. The Custom Configuration table appears.
332
1
2
2. Value Box 3. Add Button
Description
The value of the custom option.
RUGGEDCOM ROX II
User Guide
3
Deleting a Custom Client Option