Managing The Mpls Interfaces; Viewing The Status Of Mpls Interfaces - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 925: Multiprotocol Label Switching (MPLS) Configuration Form
1. Enabled Check Box
3. Configure the following parameter(s) as required:
Parameter
Enable MPLS
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.39.4

Managing the MPLS Interfaces

The following sections describe how to manage the MPLS interfaces:
• Section 5.39.4.1, "Viewing the Status of MPLS Interfaces"
• Section 5.39.4.2, "Viewing a List of MPLS Interfaces"
• Section 5.39.4.3, "Enabling/Disabling an MPLS Interface"
Section 5.39.4.1

Viewing the Status of MPLS Interfaces

To view the status of the MPLS interfaces on the device, navigate to mpls » status » interfaces. If MPLS
interfaces have been enabled on the device, the MPLS Status Interface List table appears.
Figure 926: MPLS Status Interface List Table
This table provides the following information:
804
1
Description
Default: false
A boolean flag to indicate that MPLS forwarding of IP packets is enabled.
RUGGEDCOM ROX II
User Guide
Managing the MPLS Interfaces