Adding A Prefix List Distribution Path - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.20.8.2

Adding a Prefix List Distribution Path

To add a prefix list distribution path for dynamic RIP routes, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » dynamic » rip » distribute-prefix-list and click <Add distribute-prefix-list>. The
Key Settings form appears.
Figure 563: Key Settings Form
1. Direction List
3. Configure the following parameter(s) as required:
Parameter
Direction
Interface Name
4. Click Add to add the path. The Distribute Prefix List form appears.
Figure 564: Distribute Prefix List Form
1. Prefix List List
5. Configure the following parameter(s) as required:
Parameter
Prefix List
494
1
2
2. Interface Name Box 3. Add Button
Description
Synopsis: in, out
Filters incoming or outgoing routing updates.
The name of the interface. This parameter is optional.
1
Description
The name of the prefix list.
RUGGEDCOM ROX II
User Guide
3
Adding a Prefix List Distribution Path