Chapter 4
System Administration
Section 4.7.3.2
Adding a Public Key
To add an unsigned public key, do the following:
NOTE
Do not associate the public key with the private key if the public key belongs to another device.
1.
Make sure the private key associated with the public key has been added. For more information, refer to
Section 4.7.2.2, "Adding a Private
2.
Change the mode to Edit Public or Edit Exclusive.
Navigate to security » crypto » public-key and click <Add public-key>. The Key Settings form appears.
3.
Figure 218: Key Settings Form
1. Name Box
2. Add Button
In the Key Settings form, configure the following parameters as required:
4.
Parameter
name
5.
Click Add to create the new public key. The Public Key form appears.
206
Key".
1
Description
The name of the key.
RUGGEDCOM ROX II
User Guide
2
Adding a Public Key