RUGGEDCOM ROX II
User Guide
2.
Navigate to admin » snmp » snmp-community. The SNMPv1/v2c Community Configuration table
appears.
1
Figure 271: SNMPv1/v2c Community Configuration Table
1. Add Button
3.
Click Delete next to the chosen community.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.11.6
Managing SNMP Target Addresses
The following sections describe how to configure and manage SNMP target addresses:
•
Section 5.11.6.1, "Viewing a List of SNMP Target Addresses"
•
Section 5.11.6.2, "Adding an SNMP Target Address"
•
Section 5.11.6.3, "Deleting an SNMP Target Address"
Section 5.11.6.1
Viewing a List of SNMP Target Addresses
To view a list of SNMP target addresses configured on the device, navigate to admin » snmp » snmp-target-
address. If target addresses have been configured, the SNMPv3 Target Configuration table appears.
Managing SNMP Target Addresses
2
2. Edit Button
3. Delete Button
3
Chapter 5
Setup and Configuration
265