Managing Netconf; Enabling And Configuring Netconf Sessions - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 261: BGP Daemon Memory Statistics Form
These forms provides the following information:
Parameter
total
used
free
Section 5.10

Managing NETCONF

The Network Configuration Protocol (NETCONF) is a network configuration protocol developed by the Internet
Engineering Task Force (IETF). NETCONF provides functions to download, upload, change, and delete the
configuration data on network devices. ROX II devices also support the ability to collect data and perform direct
actions on the device, such as rebooting the device, clearing statistics, and restarting services.
NOTE
For more information about NETCONF and its use, refer to the ROX II NETCONF Reference Guide.
The following sections describe how to configure and manage NETCONF:
• Section 5.10.1, "Enabling and Configuring NETCONF Sessions"
• Section 5.10.2, "Viewing NETCONF Statistics"
Section 5.10.1

Enabling and Configuring NETCONF Sessions

To enable and configure NETCONF sessions, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to admin » netconf. The NETCONF Sessions form appears.
Managing NETCONF
Description
The total heap allocated (in bytes).
The number of used ordinary blocks (in bytes).
The number of free ordinary blocks (in bytes).
Chapter 5
Setup and Configuration
251