Deleting An Ip Address; Managing Remote Daemon Egress Interfaces For Generic Tunnels - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
6.
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.29.8.3

Deleting an IP Address

To delete the IP address of a remote L2 protocols server from a generic tunnel configuration, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » l2tunneld » generic » {name} » remote-daemon » ip-address, where {name} is the
name of the generic tunnel. The Remote Daemon IP Address table appears.
1
Figure 775: Remote Daemon IP Address Table
1. Add Button 2. Edit Button
Click Delete next to the chosen IP address.
3.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.29.9
Managing Remote Daemon Egress Interfaces for Generic
Tunnels
The following sections describe how to configure and manage remote daemon egress interfaces for generic
tunnels:
• Section 5.29.9.1, "Viewing a List of Egress Interfaces"
• Section 5.29.9.2, "Adding an Egress Interface"
• Section 5.29.9.3, "Deleting an Egress Interface"
658
2 3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting an IP Address