Viewing The Status Of The Link-State Database - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 449: ISIS Neighbors Status Form
Section 5.18.3

Viewing the Status of the Link-State Database

To view the basic status of the link-state database for the IS-IS network, do the following:
1. Make sure IS-IS is configured. For more information, refer to
2. Navigate to either routing » status » isis » isis-database-status for a basic view, or routing » status »
isis » isis-database-detail-status for a more detailed view. The Trigger Action form appears.
Figure 450: Trigger Action Form - Basic View
1. Perform Button
Click Perform. The ISIS Database Status or ISIS Database Detail Status form appears.
3.
410
Section 5.18.1, "Configuring
Viewing the Status of the Link-State Database
RUGGEDCOM ROX II
User Guide
IS-IS".
1