Configuring A Subnet Client - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
authorize-server
option82
5. Configure the client for the subnet. For more information, refer to
Client"
6. Configure one or more IP pools to the subnet. For more information, refer to
Pool"
7. Configure one or more IP ranges to the subnet. For more information, refer to
IP Range to a DHCP Subnet"
8. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
9. Click Exit Transaction or continue making changes.
Section 5.15.7.4

Configuring a Subnet Client

To configure a client for a subnet, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » dhcpserver » subnet » {name} » options » client, where {name} is the name of the
subnet. The Client Configuration, NIS Configuration and NetBios Configuration forms appear.
Configuring a Subnet Client
Description
The action to take for previously unregistered clients.
Enables/disables the server's authorization on this client. If enabled, the server will send
deny messages to the client that is trying to renew the lease, which the server knows the
client shouldn't have.
Enables/disables the NAK of option 82 clients for this subnet.
Setup and Configuration
Section 5.15.7.4, "Configuring a Subnet
Section 5.15.13.2, "Adding an IP
Section 5.15.14.2, "Adding an
Chapter 5
327