Chapter 5
Setup and Configuration
Section 5.17.4
Deleting a Firewall
To delete a firewall, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to security » firewall » fwconfig. The Firewall Description Settings table appears.
1
Figure 406: Firewall Description Table
1. Add Button
2. Edit Button
3.
Click Delete next to the chosen firewall.
4.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5.
Click Exit Transaction or continue making changes.
Section 5.17.5
Working with Multiple Firewall Configurations
ROX II allows users to create multiple firewall configurations and work with one configuration while another is
active.
To set one configuration as the working configuration and another as the active configuration, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to security » firewall. The Firewall Configuration form appears.
372
2
3
3. Delete Button
RUGGEDCOM ROX II
User Guide
Deleting a Firewall