Adding A Prefix Entry - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 546: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
Name
4. Click Add to create the new prefix-list. The Prefix List form appears.
Figure 547: Prefix List Form
1. Description Box
5. Configure the following parameter(s) as required:
Parameter
Description
6. Add prefix entries as needed. For more information, refer to
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
7.
to proceed.
Click Exit Transaction or continue making changes.
8.
Section 5.20.3.4

Adding a Prefix Entry

To add an entry for a dynamic RIP prefix list, do the following:
482
1
Description
The name of the prefix list.
1
Description
The description of the prefix list.
Section 5.20.3.4, "Adding a Prefix
RUGGEDCOM ROX II
User Guide
2
Entry".
Adding a Prefix Entry