Siemens RX1500 User Manual page 651

RUGGEDCOM ROX II
User Guide
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » ipsec » preshared-key and click <Add preshared-key>. The Key Settings form
appears.
Figure 722: Key Settings Form
1. Remote Address Box
3. In the Key Settings form, configure the following parameters as required:
Parameter
Remote Address
Local Address
4. Click Add to create the new pre-shared key. The Preshared Key form appears.
Figure 723: Preshared Key Form
1. Secret Key Box
In the Preshared Key form, configure the following parameters as required:
5.
Adding a Pre-Shared Key
1
2
2. Local Address Box 3. Add Button
Description
Synopsis: any, ,
The remote address.
Synopsis: any, ,
The local address.
1
Chapter 5
Setup and Configuration
3
619