Deleting An Ntp Server - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 300: Network Time Protocol (NTP) Servers Form
1. Enable Check Box
7. Prefer Check Box
5. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
6. Click Exit Transaction or continue making changes.
Section 5.12.11.3

Deleting an NTP Server

To delete an NTP server configured on the device, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to services » time » ntp » server. The Network Time Protocol (NTP) Servers table appears.
Deleting an NTP Server
2. Peer Check Box 3. Mini Poll Box
8. Key List
4. Max Poll Box 5. IBurst Check Box
Chapter 5
Setup and Configuration
6. NTP Version Box
289