Managing Interfaces - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
1
Figure 411: Firewall Zone Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen zone.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.17.9

Managing Interfaces

Firewall interfaces are the LAN and WAN interfaces available to the router. Each interface must be placed in a
network zone. If an interface supports more than one subnet, it must be placed in zone undefined-zone and use
the zone hosts setup to define a zone for each subnet on the interface.
Table: Example
Interface
Switch.0001
Switch.0002
Switch.0003
Switch.0004
W1ppp
The following sections describe how to configure and manage zones for a firewall:
• Section 5.17.9.1, "Viewing a List of Interfaces"
• Section 5.17.9.2, "Adding an Interface"
• Section 5.17.9.3, "Associating an Interface with a Zone"
• Section 5.17.9.4, "Configuring a Broadcast Address"
• Section 5.17.9.5, "Deleting an Interface"
378
2 3
3. Delete Button
Zone
Loc
Loc
Any
DMZ
net
RUGGEDCOM ROX II
User Guide
Managing Interfaces