RUGGEDCOM ROX II
User Guide
Figure 243: Set Boot Password Form
1. New Password Box
Figure 244: Trigger Action Form
1. Perform Button
2.
On the Set Boot Password form, configure the following parameters:
Parameter
new-password
new-password-repeat
old-password
On the Trigger Action form, click Perform.
3.
Setting the Boot Password/Passphrase
1
2
3
2. New Password Repeat Box
Description
The new password or passphrase. Make sure the password/passphrase complies with
the password complexity rules configured for this device.
The new password or passphrase. Make sure the password/passphrase complies with
the password complexity rules configured for this device.
Specify the old password if there is currently a boot password set.
3. Old Password Box
Chapter 4
System Administration
1
229