Adding A Firewall - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 403: Firewall Description Table
If no firewalls have been configured, add firewalls as needed. For more information, refer to
"Adding a Firewall".
Section 5.17.3

Adding a Firewall

To add a new firewall, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to security » firewall » fwconfig and click <Add fwconfig> in the menu. The Key Settings form
2.
appears.
Figure 404: Key Settings Form
1. Name Box 2. Add Button
3. Configure the following parameter(s) as required:
Parameter
Name
4. Click Add. The Firewall Description form appears.
370
Description
RUGGEDCOM ROX II
User Guide
Section 5.17.3,
Adding a Firewall