Deleting An Ike Algorithm - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Figure 731: Key Settings Form
1. Cipher Algorithm Box
4. Configure the following parameter(s) as required:
Parameter
Cipher Algorithm
Hash Method
Modpgroup
5. Click Add to create the new algorithm.
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 5.28.7.3

Deleting an IKE Algorithm

To delete an algorithm for the Internet Key Exchange (IKE) protocol, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to tunnel » ipsec » connection » {connection} » ike, where {connection} is the name of the
connection. The Algorithm table appears.
Deleting an IKE Algorithm
1
2
3
2. Hash Method Box 3. Mod Group Box
Description
Synopsis: 3des, aes, aes256, aes192, aes128, any
The cipher algorithm. The default value is '3des' or 'aes' unless overwritten by the
default connection setting.
Synopsis: sha1, md5, any
The hash method. The default value is 'sha1' or 'md5' unless overwritten by the default
connection setting.
Synopsis: modp1024, modp1536, modp2048, modp3072, modp4096, modp6144,
modp8192, any
The Modular Exponential (MODP) group. The default value is 'modp1024' or 'modp1536'
unless overwritten by the default connection setting.
4. Add Button
Chapter 5
Setup and Configuration
4
627