Configuring A Black Hole Connection For An Ipv4 Static Route - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 627: Static Route Table
1. Add Button
3. Click Delete next to the chosen route.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.22.5
Configuring a Black Hole Connection for an IPv4 Static
Route
To configure a black hole connection for an IPV4 static route, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to routing » static » ipv4 » {subnet}, where subnet is the subnet (network/prefix) of the static
route.
3. Click the + symbol in the menu next to blackhole. The Blackhole Static Route form appears.
Figure 628: Blackhole Static Route Form
1. Distance Box
4. Configure the following parameter(s) as required:
Parameter
Distance (optional)
Configuring a Black Hole Connection for an IPv4 Static
Route
2. Edit Button 3. Delete Button
1
Description
Default: 1
2 3
Chapter 5
Setup and Configuration
541