Associating An Interface With A Zone - Siemens RX1500 User Manual

Ruggedcom rox ii series
Hide thumbs Also See for RX1500:
Table of Contents

Advertisement

RUGGEDCOM ROX II
User Guide
Parameter
description
7.
On the Interface Options, configure the following parameter(s) as required:
Parameter
ARP Filter
Routeback
TCP Flags
DHCP
NORFC1918
Route Filter
Proxy ARP
MAC List
No Smurfs
Log Martians
8.
Associate the interface with a pre-defined zone or mark the assocated zone as undefined. For more
information about associating the interface with a zone, refer to
with a Zone"
9.
Configure a broadcast address for the interface. For more information configuring a broadcast address, refer
to
Section 5.17.9.4, "Configuring a Broadcast Address"
10. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
11. Click Exit Transaction or continue making changes.
Section 5.17.9.3

Associating an Interface with a Zone

To associate an interface with a pre-defined zone or mark the assocated zone as undefined, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to security » firewall » fwconfig » fwconfig » {firewall} » fwinterface{interface} » zone, where
{firewall} is the name of the firewall and {interface} is the name of the interface. The Zone form appears.
Associating an Interface with a Zone
Description
(Optional) The description string for this interface
Description
Responds only to ARP requests for configured IP addresses (This is permanently
enabled system wide since ROX 2.3.0, and this option no longer has any effect).
Allows traffic on this interface to be routed back out that same interface.
Illegal combinations of TCP flags dropped and logged at info level.
Allows DHCP datagrams to enter and leave the interface.
Not currently implemented
Enables route filtering.
Enables proxy ARP.
Not currently implemented
Packets with a broadcast address as the source are dropped and logged at info level.
Enables logging of packets with impossible source addresses.
Section 5.17.9.3, "Associating an Interface
Chapter 5
Setup and Configuration
381

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rx1501Rx1510Rx1511Rx1512

Table of Contents