Managing Redistribution Metrics; Viewing A List Of Redistribution Metrics - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 611: Incoming Route Filter Table
1. Add Button
3. Click Delete next to the chosen incoming route filter.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.21.8

Managing Redistribution Metrics

Redistribution metrics redistribute routing information from other routing protocols, static routes or routes handled
by the kernel. Routes for subnets that are directly connected to the router, but not part of the OSPF areas, can
also be advertised.
The following sections describe how to configure and manage redistribution metrics:
• Section 5.21.8.1, "Viewing a List of Redistribution Metrics"
• Section 5.21.8.2, "Adding a Redistribution Metric"
• Section 5.21.8.3, "Deleting a Redistribution Metric"
Section 5.21.8.1

Viewing a List of Redistribution Metrics

To view a list of redistribution metrics for dynamic OSPF routes, navigate to routing » dynamic » ospf »
redistribute. If metrics have been configured, the Redistribute Route from Other Protocols table appears.
Figure 612: Redistribute Route from Other Protocols Table
If no redistribution metrics have been configured, add metrics as needed. For more information, refer to
Section 5.21.8.2, "Adding a Redistribution
Managing Redistribution Metrics
2 3
2. Edit Button 3. Delete Button
Metric".
Chapter 5
Setup and Configuration
529