Validating A Firewall Configuration - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1
Figure 443: Main Rule Settings Table
1. Add Button
3. Click Delete next to the chosen rule.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.17.15

Validating a Firewall Configuration

To validate a firewall configuration, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to security » firewall. The Firewall Configuration form appears.
2.
Figure 444: Firewall Configuration Form
1. Enable Active Configuration Check Box
3. Under Specify work configuration, select the firewall configuration from the list.
4. Click Commit to save the changes. The system validates the firewall configuration and displays the results.
Click Exit Transaction or continue making changes.
5.
Validating a Firewall Configuration
2. Edit Button 3. Delete Button
2. Specify Work Configuration List
Setup and Configuration
3. Specify Active Configuration List
Chapter 5
2
3
405