Managing Serial Ports; Viewing A List Of Serial Ports - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
Admin Status
Notify
5. Add a VLAN ID (VID) for the port. For more information, refer to
Routable Ethernet Port or Virtual
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.20

Managing Serial Ports

The following sections describe how to configure and manage serial ports:
• Section 3.20.1, "Viewing a List of Serial Ports"
• Section 3.20.2, "Viewing Serial Port Statistics"
• Section 3.20.3, "Viewing Transport Connection Statistics"
• Section 3.20.4, "Viewing DNP Device Table Statistics"
• Section 3.20.5, "Clearing Serial Port Statistics"
• Section 3.20.6, "Configuring a Serial Port"
• Section 3.20.7, "Restarting the Serial Server"
• Section 3.20.8, "Resetting a Serial Port"
Section 3.20.1

Viewing a List of Serial Ports

To view a list of serial ports configured on the device, navigate to interface » serial. The Serial Interfaces table
appears.
Managing Serial Ports
Description
Synopsis: tx-only, rx-only, rx-tx, no-lldp
Default: rx-tx
• no-lldp : The local LLDP agent can neither transmit nor receive LLDP frames.
• rxTx : The local LLDP agent can both transmit and receive LLDP frames through the
port.
• txOnly : The local LLDP agent can only transmit LLDP frames.
• rxOnly : The local LLDP agent can only receive LLDP frames.
Disabling notifications will prevent sending notifications and generating alarms for a
particular interface from the LLDP agent.
Switch".
Section 5.35.8.3, "Adding a VLAN ID to a
Chapter 3
Device Management
111