Chapter 3
Device Management
Parameter
timestamp
url
4.
On the Trigger Action form, click Perform.
Section 3.15
Managing Fixed Modules
The following sections describe how to configure and manage fixed modules:
•
Section 3.15.1, "Viewing a List of Fixed Module Configurations"
•
Section 3.15.2, "Adding a Fixed Module Configuration"
•
Section 3.15.3, "Deleting a Fixed Module Configuration"
Section 3.15.1
Viewing a List of Fixed Module Configurations
To view a list of fixed module configurations, navigate to chassis » fixed-modules. If fixed modules have been
configured, the Fixed Modules table appears.
Figure 78: Fixed Modules Table
If no fixed modules have been configured, add fixed module configurations as needed. For more information,
refer to
Section 3.15.2, "Adding a Fixed Module
Section 3.15.2
Adding a Fixed Module Configuration
To add a configuration for a fixed module, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to chassis » fixed-modules and click <Add fixed-module>. The Key Settings form appears.
78
Description
Default: false
If enabled, a timestamp will be appended to the file name. This option is not applicable
to file names that contain '*'.
The URL of the ROX file to copy. SCP, SFTP, FTPS, FTP and HTTP are supported for
the file transfer. To save to a USB device, the format is 'usb://path-to-file-on-system'
and only one single partition is supported. For the rest of the protocols, the format is
'protocol://user:password@host:port/path-to-file'. If using a path only, close it with '/'. If
'port' is not specified, the default port for the protocol is used.
Configuration".
RUGGEDCOM ROX II
User Guide
Managing Fixed Modules