Deleting An Aggregate Address Option; Managing Redistribution Metrics; Viewing A List Of Redistribution Metrics - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Section 5.19.10.3

Deleting an Aggregate Address Option

To delete an option for an aggregate address, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » bgp » aggregate-address » {address} » options, where {address} is the
2.
subnet address and prefix for the aggregate address. The ggregate Network Options table appears.
1
Figure 534: ggregate Network Options Table
1. Add Button
3. Click Delete next to the chosen option.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.19.11

Managing Redistribution Metrics

Redistribution metrics redistribute routing information from other routing protocols, static routes or routes handled
by the kernel. Routes for subnets that are directly connected to the router, but not part of the BGP network, can
also be advertised.
The following sections describe how to configure and manage redistribution metrics for BGP:
• Section 5.19.11.1, "Viewing a List of Redistribution Metrics"
• Section 5.19.11.2, "Adding a Redistribution Metric"
• Section 5.19.11.3, "Deleting a Redistribution Metric"
Section 5.19.11.1

Viewing a List of Redistribution Metrics

To view a list of redistribution metrics for dynamic BGP routes, navigate to routing » dynamic » bgp »
redistribute. If metrics have been configured, the Redistribute Route from Other Protocols table appears.
Deleting an Aggregate Address Option
2 3
2. Edit Button 3. Delete Button
Chapter 5
Setup and Configuration
473