Deleting An Ipv6 Address; Managing Mpls - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to ip » {interface} » ipv6 » adress, where {interface} is the name of the routable interface.
3. Click <Add address>. The Key Settings form appears.
Figure 922: Key Settings Form
1. Address Box
4. Configure the following parameter(s) as required:
Parameter
IP Address
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
Click Exit Transaction or continue making changes.
6.
Section 5.38.6.3

Deleting an IPv6 Address

To delete an IPv6 address for a routable interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
2. Navigate to ip » {interface} » ipv6 » address, where {interface} is the name of the routable interface.
3. Click - symbol in the menu next to the chosen address.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.39

Managing MPLS

MPLS stands for Multi-Protocol Label Switching. MPLS operates between layer 2 and layer 3 of the OSI (Open
Systems Interconnection) model and it provides a mechanism to carry traffic for any network layer protocols.
MPLS makes forwarding decision based on labels where the labels are mapped to destination IP networks.
Deleting an IPv6 Address
1
2. Add Button
Description
The IPv6 address/prefix of this interface.
Chapter 5
Setup and Configuration
2
801