Siemens RX1500 User Manual page 120

Chapter 3
Device Management
Figure 90: Event Form
1. Target Box 2. Source IP Box
Box
5. Configure the following parameter(s) as required:
Parameter
Target
Source IP
Source Interface
Timeout (ms)
Interval (ms)
Fall
88
1
2
3
4
5
6
7
8
3. Source Interface Box
Description
Synopsis: The host type represents either an IP address or a DNS domain name.
Configures the ping target as an IPv4 address or hostname.domain.
Synopsis: The ip-address type represents an IP address and is IP version neutral.
The format of the textual representations implies the IP version.
Sets the source address to a specified IPv4 address.
Forces a ping on a selected interface.
Determines how many milliseconds to wait for the ICMP response.
Determines how many milliseconds to wait before sending another ICMP request.
The number of times a failure occurs before changing the tracking state from up to
down.
4. Timeout Box 5. Interval Box
RUGGEDCOM ROX II
User Guide
6. Fall Box 7. Rise Box 8. State
Adding an Event Tracker