Managing Wan Interfaces - Siemens RX1500 User Manual

Chapter 3
Device Management
Figure 158: CDMA Profile Form (Example)
1. Connect List
11. Configure the following parameter(s) as required:
Parameter
Connect
12. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
13. Click Exit Transaction or continue making changes.
Section 3.24

Managing WAN Interfaces

The following sections describe how to configure and manage WAN interfaces:
• Section 3.24.1, "Viewing a List of WAN Interfaces"
• Section 3.24.2, "Configuring a WAN Interface"
• Section 3.24.3, "Viewing WAN Statistics"
• Section 3.24.4, "Clearing WAN Statistics"
• Section 3.24.5, "Performing a Loopback Test"
• Section 3.24.6, "Configuring a T1 Line"
• Section 3.24.7, "Configuring an E1 Line"
• Section 3.24.8, "Configuring DDS"
• Section 3.24.9, "Managing Channels"
• Section 3.24.10, "Configuring an HDLC-ETH Connection"
• Section 3.24.11, "Configuring a Multi Link PPP Connection"
• Section 3.24.12, "Configuring a PPP Connection"
• Section 3.24.13, "Configuring a Frame Relay Connection"
• Section 3.24.14, "Managing Data Links for Frame Relay Connections"
152
1
Description
Selects the gsm profile to connect to wireless network. The gsm profile is configured in /
global/cellular/profiles/gsm
RUGGEDCOM ROX II
User Guide
Managing WAN Interfaces