RUGGEDCOM ROX II
User Guide
If no ports have been forbidden, add forbidden ports as needed. For more information, refer to
"Adding a Forbidden
Section 5.35.5.2
Adding a Forbidden Port
To add a forbidden port, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to switch » vlans » static-vlan » {name} » forbidden-ports, where {name} is the name of the
static VLAN.
3.
Click <Add forbidden-ports>. The Key Settings form appears.
Figure 847: Key Settings Form
1. Slot Box
2. Add Button
4.
Configure the following parameter(s) as required:
Parameter
Slot
Port
5.
Click Add to add the forbidden port.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
6.
to proceed.
Click Exit Transaction or continue making changes.
7.
Section 5.35.5.3
Deleting a Forbidden Port
To delete a forbidden port, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
Navigate to switch » vlans » static-vlan » {name} » forbidden-ports, where {name} is the name of the
2.
static VLAN. The Forbidden Ports table appears.
Adding a Forbidden Port
Port".
1
Description
Synopsis: sm, lm1, lm2, lm3, lm4, lm5, lm6
The name of the module location provided on the silkscreen across the top of the
device.
The selected ports on the module installed in the indicated slot.
Chapter 5
Setup and Configuration
Section 5.35.5.2,
2
737