Adding A Vrrp Group; Deleting A Vrrp Group - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Figure 682: VRRP Group Table
If no VRRP groups have been configured, add groups as needed. For more information, refer to
"Adding a VRRP Group".
Section 5.26.5.2

Adding a VRRP Group

To add a VRRP group, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to services » vrrp » group and click <Add group>. The Key Settings form appears.
2.
Figure 683: Key Settings Form
1. Group Name Box
3. Configure the following parameter(s) as required:
Parameter
Group Name
4. Click Add to add the group.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
5.
to proceed.
Click Exit Transaction or continue making changes.
6.
Section 5.26.5.3

Deleting a VRRP Group

To delete a VRRP group, do the following:
588
1
2. Add Button
Description
The VRRP group name.
RUGGEDCOM ROX II
User Guide
Section 5.26.5.2,
2
Adding a VRRP Group