Configuring Dds - Siemens RX1500 User Manual

RUGGEDCOM ROX II
User Guide
Parameter
clock
5. Add and configure channels for the E1 line. For more information, refer to
Channel".
6. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
7. Click Exit Transaction or continue making changes.
Section 3.24.8

Configuring DDS

To configure DDS for a WAN interface, do the following:
1. Change the mode to Edit Private or Edit Exclusive.
Navigate to interface » wan » {interface}, where {interface} is the WAN interface.
2.
3. Click the + symbol in the menu next to DDS to enable DDS.
4. Click the + symbol in the menu next to ddsparams. The DDS Parameters form appears.
Figure 169: DDS Parameters Form
1. Mode List 2. Clock List
5. Configure the following parameter(s) as required:
Parameter
mode
clock
Configuring DDS
Description
Synopsis: normal, master
Default: normal
Serial clocking mode: master or normal.
• master : provide serial clock signal.
• normal : accept external clock signal.
1
2
Description
Synopsis: 56k, 64k
Default: 56k
DDS speed mode (kbps).
Synopsis: normal, master
Default: normal
Serial clocking mode: master or normal.
Device Management
Section 3.24.9.2, "Adding a
Chapter 3
161