Deleting An Ipv6 Network Prefix; Managing Ipv6 Addresses; Viewing A List Of Ipv6 Addresses; Adding An Ipv6 Address - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Section 5.38.5.2

Deleting an IPv6 Network Prefix

To delete a network prefix to the neightbor discovery configuration for an IPv6 address, do the following:
Change the mode to Edit Private or Edit Exclusive.
1.
2. Navigate to ip » {interface} » ipv6 » nd » prefix, where {interface} is the name of the routable interface.
3. In the menu, click the - symbol next to chosen network prefix to delete it.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
4.
to proceed.
Click Exit Transaction or continue making changes.
5.
Section 5.38.6

Managing IPv6 Addresses

The following sections describe how to configure and manage IPv6 addresses:
• Section 5.38.6.1, "Viewing a List of IPv6 Addresses"
• Section 5.38.6.2, "Adding an IPv6 Address"
• Section 5.38.6.3, "Deleting an IPv6 Address"
Section 5.38.6.1

Viewing a List of IPv6 Addresses

To view a list of IPv6 address for a routable interface, navigate to ip » {interface} » ipv6 » address, where
{interface} is the name of the routable interface. If addresses have been configured, they are listed in the menu.
Figure 921: IPv6 Address Menu
If no addresses have been configured, add addresses as needed. For more information, refer to
"Adding an IPv6 Address".
Section 5.38.6.2

Adding an IPv6 Address

To add an IPv6 address to a routable interface, do the following:
800
RUGGEDCOM ROX II
User Guide
Section 5.38.6.2,
Deleting an IPv6 Network Prefix