Chapter 5
Setup and Configuration
Figure 535: Redistribute Route from Other Protocols Table
If no redistribution metrics have been configured, add metrics as needed. For more information, refer to
Section 5.19.11.2, "Adding a Redistribution
Section 5.19.11.2
Adding a Redistribution Metric
To add a redistribution metric for dynamic BGP routes, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
Navigate to routing » dynamic » bgp » redistribute and click <Add redistribute>. The Key Settings form
2.
appears.
Figure 536: Key Settings Form
1. Redistribute Route From List
3.
Configure the following parameter(s) as required:
Parameter
Redistribute Route From
4.
Click Add to add the metric. The Redistribute Route From Other Protocols form appears.
474
Metric".
1
2. Add Button
Description
Synopsis: kernel, static, connected, ospf, rip
Redistribute route type.
RUGGEDCOM ROX II
User Guide
2
Adding a Redistribution Metric