RUGGEDCOM ROX II
User Guide
Figure 335: Shared Network Configuration Table
If no shared networks have been configured, add shared networks as needed. For more information, refer to
Section 5.15.6.2, "Adding a Shared
Section 5.15.6.2
Adding a Shared Network
To add a shared network to the DHCP server, do the following:
1.
Change the mode to Edit Private or Edit Exclusive.
2.
Navigate to services » dhcpserver » shared-network and click <Add shared-network>. The Key
Settings form appears.
Figure 336: Key Settings Form
1. Name Box
2. Add Button
3.
Configure the following parameter(s) as required:
Parameter
name
Click Add to create the new shared network.
4.
5.
Configure options for the shared network. For more information, refer to
Shared Network
6.
Configure the client for the shared network. For more information, refer to
Shared Network
7.
Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
8.
Click Exit Transaction or continue making changes.
Adding a Shared Network
Network".
1
Description
The unique name to refer to the host within a DHCP configuration.
Options".
Client".
Setup and Configuration
2
Section 5.15.6.3, "Configuring
Section 5.15.6.4, "Configuring a
Chapter 5
317