Viewing A Summary Of Multicast Groups - Siemens RX1500 User Manual

Chapter 5
Setup and Configuration
Navigate to switch » mcast-filtering » static-mcast-table » {id/address} » egress-ports, where {id/
2.
address} is the VLAN ID for the static multicast group and the MAC address for the host device. The Egress
Ports table appears.
1
Figure 671: Egress Ports Table
1. Add Button 2. Edit Button
3. Click Delete next to the chosen egress port.
4. Click Commit to save the changes or click Revert All to abort. A confirmation dialog box appears. Click OK
to proceed.
5. Click Exit Transaction or continue making changes.
Section 5.25.7

Viewing a Summary of Multicast Groups

To view a summary of all multicast groups, navigate to switch » mcast-filtering » mcast-group-summary. If
multicast groups have been configured, the Multicast Group Summary table appears.
Figure 672: Multicast Group Summary Table
This table provides the following information:
Parameter
VLAN ID
MAC Address
578
2 3
3. Delete Button
Description
The VLAN Identifier of the VLAN upon which the multicast group operates.
The multicast group MAC address.
RUGGEDCOM ROX II
Viewing a Summary of Multicast Groups
User Guide