Power:modulation:source - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

:POWer:MODulation:SOURce

Command Syntax
:POWer:MODulation:SOURce <source>
<source> ::= {V | I}
The :POWer:MODulation:SOURce command selects either the voltage source
or the current source as the source for the modulation analysis.
Query Syntax
:POWer:MODulation:SOURce?
The :POWer:MODulation:SOURce query returns the selected source for the
modulation analysis.
Return Format
<source><NL>
<source> ::= {V | I}
See Also
•
•
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
(see page 1138)
":POWer:MODulation:APPLy"
":POWer:MODulation:TYPE"
on page 550
on page 552
24
:POWer Commands
551