Power:modulation:apply - Agilent Technologies InfiniiVision 3000 X-Series Programmer's Manual

24
:POWer Commands

:POWer:MODulation:APPLy

Command Syntax
:POWer:MODulation:APPLy
The :POWer:MODulation:APPLy command applies the selected modulation
analysis type (:POWer:MODulation:TYPE).
The Modulation analysis measures the control pulse signal to a switching
device (MOSFET) and observes the trending of the pulse width, duty cycle,
period, frequency, etc. of the control pulse signal.
See Also •
•
•
•
•
•
•
•
•
•
•
•
550
(see page 1138)
":POWer:MODulation:SOURce"
":POWer:MODulation:TYPE"
":MEASure:VAVerage"
":MEASure:VRMS" on page 463
":MEASure:VRATio" on page 462
":MEASure:PERiod" on page 433
":MEASure:FREQuency"
":MEASure:PWIDth" on page 437
":MEASure:NWIDth"
":MEASure:DUTYcycle"
":MEASure:RISetime"
":MEASure:FALLtime"
Agilent InfiniiVision 3000 X-Series Oscilloscopes Programmer's Guide
on page 551
on page 552
on page 457
on page 426
on page 429
on page 424
on page 441
on page 425