Show Interface; Show Interface Errors - Cisco CSS11501 - 100Mbps Ethernet Load Balancing Device Configuration Manual
11000 series secure content accelerator
Hide thumbs
Also See for CSS11501 - 100Mbps Ethernet Load Balancing Device:
- Hardware installation manual (184 pages) ,
- Datasheet (10 pages) ,
- Product support bulletin (3 pages)
Table of Contents
Advertisement
Top Level Command Set
show interface
Syntax Description
Usage Guidelines
Related Commands
show interface errors
Syntax Description
Cisco 11000 Series Secure Content Accelerator Configuration Guide
C-18
Displays information for the specified Ethernet interface(s).
show interface [network | server]
network
server
Availability: Serial, Telnet; FIPS Mode (serial only)
The information includes connection, duplex, speed, and autonegotiation settings.
If a single interface is not specified, information is displayed for all interfaces on
the device.
show interface errors (Non-Privileged Command Set)
show interface statistics (Non-Privileged Command Set)
interface (Configuration Command Set)
See the section "Interface Configuration Command Set".
Displays error information for the specified Ethernet interface(s).
show interface errors [network | server] [continuous] [interval <value>]
network
server
continuous
interval
value
Displays information for the "Network" interface.
Displays information for the "Server" interface.
Displays information for the "Network" interface.
Displays information for the "Server" interface.
Displays errors continuously.
Specifies an interval for display updates.
The interval in seconds.
Appendix C
Command Summary
78-13124-05
Advertisement
Table of Contents
Troubleshooting
