Visual Inspection - Cisco GS7000 Maintenance Manual

Maintenance
Procedure
Wiring/Cable Assemblies
Cleaning:
External Surfaces
External Controls/Connectors
Internal Connectors/Circuit Cards

Visual Inspection

Visually inspect the following items.
What to Inspect
Exterior surfaces
Connectors
Wiring and cables
Cleaning
Clean exterior surfaces of the equipment at least annually.
Interval
Annually
Annually
Annually
Annually
How to Inspect
Inspect for:
• dust, dirt, lubricants, or other foreign matter worn spots or deep scratches
on surfaces
• corrosion
• marred protective finish exposing bare metal
• missing, incorrect or obliterated marking, decals, or reference designators
Inspect for:
• broken, loose, bent, corroded, or missing pins
• cracked insulator inserts
Inspect for:
• cuts, nicks, burns, or abrasions
• exposed bare conductors
• sharp bends
• pinched or damaged wires
• broken or loose lacing or clamps
Visual Inspection
Maintenance
3