Spots (from ADF)
Phaser 6180MFP Multifunction Printer Service Manual
There are spots on copies from the ADF.
Initial Actions
Check the document glass.
Ensure there are no debris on the document glass.
Troubleshooting Reference Table
Applicable Parts
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step
Actions and Questions
1
1. Check the output document.
2. Are there spots on the output
document?
1. Check for any debris on the
2
document glass and the CVT
window.
2. Are there any debris?
3
Does the image quality improve?
Print-Quality Troubleshooting
Example Print
Yes
Replace the
original
document.
Remove the
debris and clean
the document
glass using a
lint-free cloth.
Complete.
Spots on Glass
No
Go to step 2.
Go to step 3.
Replace the
ADF Scanner
Assembly
(page 8-103).
5-67