Tray 3 Size Switch (Pl13.3.5) - Xerox Phaser 6180MFP Service Manual

Tray 3 Size Switch (PL13.3.5)

Phaser 6180MFP Multifunction Printer Service Manual
1. Remove the Optional 550-Sheet Feeder (page 8-116).
2. Remove the Tray 3 Rear Cover (page 8-118).
3. Remove the Optional Feeder Assembly (page 8-117).
4. Remove the Tray 3 Front Right Cover (page 8-121).
5. Remove the Tray 3 OPF Right Cover (page 8-122).
6. Disconnect the Tray 3 Size Switch connector P/J4211.
7. Release the Clamp securing the Tray 3 Size Switch wiring harness.
8. Remove 1 screw (8 mm) securing the Tray 3 Size Switch to the Tray 3
Right Guide (PL13.3.11).
9. Release the tabs on the Tray 3 Size Switch from the holes of the Tray 3
Right Guide and remove the Tray 3 Size Switch.
P/J4211
Service Parts Disassembly
s6180mfp-340
8-129