Xerox Phaser 6180MFP Service Manual page 366

Error Messages and Codes
Scanner Error
3-178
The Scanner has failed. The following troubleshooting procedure applies to
these errors.
Applicable Chain Link
Chain Link
Chain Link
Initial Actions
Cycle printer power.
If the problem persists, follow the procedure below.
Troubleshooting Reference Table
Applicable Parts
Scanner Controller Board, PL9.1.1
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the wiring harness
connectors P/J60, P/J62, P/J63, P/
J64, and P/J65 on the Scanner
Controller Board. Reseat the
connectors.
2. Does the error still occur when the
printer is turned On?
1. Replace the ADF Scanner Assembly
2
(page 8-103).
2. Does the error still occur when the
printer is turned On?
062-320: Scanner Error (Image Scanning Error)
062-321: Scanner Error (Scanner Malfunction)
Wiring and Plug/Jack Map References
"Automatic Document Feeder Wiring
Diagram" on page 10-53
Phaser 6180MFP Multifunction Printer Service Manual
Yes No
Go to step 2. Complete.
Replace the Complete.
Scanner
Controller Board
(page 8-99).