Incorrect Magnification - Xerox Phaser 6180MFP Service Manual

Incorrect Magnification

Phaser 6180MFP Multifunction Printer Service Manual
Incorrect magnification when copying with the ADF feeding.
Initial Actions
Check the paper transfer path.
Ensure there are no debris on the transfer path.
Troubleshooting Reference Table
Applicable Parts
ADF Scanner Assembly, PL11.1.1
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the paper condition.
2. Is the paper dry, recommended,
loaded in the correct position, and
meet the ADF specifications?
Is the ADF closed against the
2
document glass completely?
1. Perform Scanner Calibration
3
procedure ("Scanner Calibration" on
page 6-8).
2. Does the error still occur?
Print-Quality Troubleshooting
Example Print
Magnification Incorrect
Yes
Go to step 2.
Go to step 3.
Replace the ADF
Scanner
Assembly
(page 8-129).
No
Replace the
paper or use the
platen mode.
Close the ADF.
Complete.
5-65