Ac Power Supply Troubleshooting - Xerox Phaser 6180MFP Service Manual

AC Power Supply Troubleshooting

Phaser 6180MFP Multifunction Printer Service Manual
Troubleshooting Reference Table
Applicable Parts
LVPS, PL9.2.14
Troubleshooting Procedure Table
Step Actions and Questions
1 1. Check the voltage at the AC wall outlet.
2. Is there approximately 110 VAC (or
220 VAC if the printer is a 220 V
configuration) at the AC wall outlet?
1. Check the power cord for defects or loose
2
connection.
2. Is the power cord loose or defective?
General Troubleshooting
Wiring and Plug/Jack References
Yes
Go to step 2.
Replace or
reconnect the
power cord.
No
Notify the
customer of
improper AC
output from
the outlet.
Replace the
LVPS
(page 8-83).
4-83