Service Parts Disassembly
8-66
18.
Disconnect the HVPS connector P/J16 from the MCU (PL9.2.13).
19.
Remove 2 screws (6 mm, with washer) securing the HVPS wiring
harnesses.
20.
Remove 5 screws (10 mm) and 3 screws (6 mm) securing the HVPS to
the printer.
21.
Release the upper part of the HVPS from the 2 tabs on printer, pull out
the connector through the hole of the printer, and remove the HVPS.
P/J16
P/J16
Clamp
Phaser 6180MFP Multifunction Printer Service Manual
s6180mfp-296
s6180mfp-298