Service Parts Disassembly
Tray 3 Feed Clutch (PL13.2.5)
8-124
1.
Remove the Optional 550-Sheet Feeder (page 8-116).
2.
Remove the Tray 3 Rear Cover (page 8-118).
3.
Remove the Optional Feeder Assembly (page 8-117).
4.
Remove the Front Right Cover (page 8-121).
5.
Remove the Tray 3 OPF Right Cover (page 8-122).
Note
When performing the following step, leave the junction connector on the
Optional Frame Assembly.
6.
Disconnect the Tray 3 Feed Clutch connector P/J4213.
7.
Release the Clamp securing the Tray 3 Feed Clutch wiring harness to the
Feed Shaft.
8.
Remove the KL-ring securing the Optional Feed Clutch to the Optional
Feed Shaft.
9.
Remove the Optional Feed Clutch from the Optional Feed Shaft.
Phaser 6180MFP Multifunction Printer Service Manual
P/J4213
s6180mfp-337