Phaser 6180MFP Multifunction Printer Service Manual
Tray 3 Feed Motor (FULL2/FULL1/HALF/LOW)
Note
The rotational speed of the Motor is as follows:
LOW < HALF < FULL2 < FULL1
1.
Enter the Service Diagnostic menu (page 4-5).
2.
Remove Tray 3.
3.
Remove the Tray 3 Left Cover (page 8-117).
4.
Perform the Tray 3 Feed Motor (FULL2/FULL1/HALF/LOW) test:
Diag
>
Engine Diag
HALF/LOW).
5.
Verify that the Tray 3 Feed Motor is running.
6.
Press the Stop button to stop the Tray 3 Feed Motor test.
>
Motor Test
>
Tray 3 Feed Motor (FULL2/FULL1/
Tray 3 Feed Motor
General Troubleshooting
Printer
s6180mfp-178
4-59